42m³

42m³ LPG TRANSPORT TANK TECHNICAL DETAILS: 

 DATA SHEET
BRANDASE SANAT CO.
TANK TYPEHorizontal Cylindrical
PROJECT CODEAD‐Merkblatter / EN 13445
DESIGN TEMPERATUREMin ‐20 ͦC / max +50 ͦC
DESIGN PRESSURE17,5 Bar
TEST PRESSURE26,5 Bar
MATERIALP355 NL1
HEAD TYPEEllipsoidal
EXTERNAL TANK DIAMETER2,200mm
BODY TANK THICKNESS10mm
HEAD TANK THICKNESS12mm (min)
TOTAL LENGTH OF TANK11700
TANK VOLUME42m3



EQUIPMENT TANKS OVER
3" INCH SAFETY RELIEF VALVE (2 UNITS)
3" INCH Drain
1" ROTOGAUGE
3" EXCESS FLOW VALVE FOR LOADING
3" EXCESS FLOW VALVE FOR UNLOADING
2" EXCESS FLOW VALVE FOR VAPOUR CONTROL
¼ " LEVEL FIX VALVE (25, 50, 75, and 90%) (4 UNITS)
½ " THERMOMETER (‐36/60 ͦC)
¼ " PRESSURE GAUGE (0‐25 Bar)
3" BALL VALVE (2 UNITS) , ADOPTER AND ELBOW
2" BALL VALVES , ADOPTER AND ELBOW
16 INCH MANHOLE
EARTHING BAR
BLASTING AND PAINTINGPrior to painting the tank will be blasted with 2 ½ quality, primer,
Mid coat & top coat based on MIO & high build epoxy applied
providing to a total thickness of 150 microns
CONTROL ( INSPECTION AND TEST)
All tests & inspections mentioned below will be carried out under the control of QA department &
certified by the same authority.
- Checking & approval of design & calculations,
- Material inspection
- Visual & dimensional inspection & orientation control
- Head control
- Radiographic control as per UW‐11 & UG‐116, RTII
- Penetrate dye test
- Hydrostatic test
The reports of the A/M test & inspections will be presented to the inspection certificate of the tank
after the completion of the tank & the inspections.
CERTIFICATIONISO 9001‐2008 ISO 3834‐2
ISO 18001
WELDING METHODAll welders are certified according to EN 287‐1:2004 standard. Full
penetration will be provided in weld seams. Welding will be carried out
as submerged arc welding by welders. Specification and qualification of
welding procedures for metallic materials ( General rules ) will comply
with ISO15607 and ISO 15609‐1 for Arc welding and welding
consumables – Filler materials and fluxes with ISO14344
BAFFLESTank will have 2 units of Anti‐slosh baffles.
CHASSISHalf chassis made of P355 NL1 steel quality
AXLEBrand: SAF/BPW
Capacity: 3x9 tons/per axle
Type: Air suspension Axle Drum Brake
SUSPENSION SYSTEMAir Suspension
BRAKE SYSTEM
LIFTING JACK
( LANDING GEARS )
JOST brand with double speed and the capacity to carry 50 tons each.
TIRES385/65R22.5, 6 units with Guarantee
RIMSSize is 20" , 6 units + One Unit Spare
KING PINJOST brand 2" flange and a high level of beating stress and rupture‐
resistant steel and bolted to the system has been dismantled and can be
changed easily.
EBSWEB CO & KENOR Brands
ELECTRICAL SYSTEMThere are 24 V electrical systems with European norms. In addition, tank‐
top and trailer top and the electric lamp and warning will be posters.
(ADR) 2 stop lights on the rear Bumper, 5 lights on the each side of the
tank.
ACCESSORIES1 unit spare tire carrier basket
1 units Fire Extinguisher Cabinet (ADR)